Water Underfloor Heating
Fastwarm® Underfloor Heating Water Kits use a series of pipes running through the floor which connect to a manifold, this is then connected to the boiler to circulate warm water throughout the floor. Because the heat emitted from an underfloor system is more evenly distributed than a single radiator, the system can use water at a lower temperature, making it a more efficient way of heating your home.
Underfloor heating is generally associated with stone or tiled floors, however the Fastwarm® Underfloor Heating Water kits are compatible with most flooring suitable for underfloor heating. Carpet floors including underlay must have a tog lower than 2.5 tog to reduce thermal block.
Fastwarm® Standard Output Water Underfloor Heating Kits are designed for installation in well insulated areas or internal rooms as pipe centres are @ 250mm spacings.
Standard Output Systems are supplied with Fastwarm Pipe Staples for use within a screed.
Supplied with 1 thermostat to control an individual zone.
Kit sizes range from 12m2 to 100m2
Fastwarm® High Output Water Underfloor Heating Kits are designed for installation in high heat loss areas such as conservatories or rooms with many external walls and lots of glass etc as pipe centres are @ 200mm spacings.
Standard Output Systems are supplied with Fastwarm Pipe Staples for use within a screed.
Supplied with 1 thermostat to control an individual zone.
Kit sizes range from 10m2 to 80m2
Fastwarm® Ultra High Output Water Underfloor Heating Kits are designed for installation in areas where a higher output per square meter is required. Also suitable for low temperature heat sources such as Air Source Heat Pumps as pipe centres are @ 150mm spacings
Ultra High Output Systems are supplied with Fastwarm Pipe Staples for use within a screed.
Supplied with 1 thermostat to control an individual zone.
Kit sizes range from 15m2 to 120m2
Fastwarm® High Output Crate Water Kits are designed for easy installation using Fastwarm Egg Crate in high heat loss areas such as conservatories or rooms with many external walls and lots of glass etc as pipe centres are @ 200mm spacings.
Supplied with 1 thermostat to control an individual zone.
Kit sizes range from 10m2 to 80m2
Fastwarm® Multi Zone Water Underfloor Heating Kits are designed for multiple zones and whole home applications such as new builds or whole home renovations. Allowing for individual room control using multiple thermostats for each system to set different temperatures and times accordingly.
Fastwarm® Multi Zone Water Underfloor Heating Kits are based on 200mm pipe centres.
Multi Zone Systems are supplied with Fastwarm Pipe Staples for use within a screed.
Kit sizes range from 40m2 to 200m2
Fastwarm® Multi Zone Crate Water Kits are designed for multiple zones and whole home applications such as new builds or whole home renovations using Fastwarm Eggcrate Allowing for individual room control using multiple thermostats for each system to set different temperatures and times accordingly.
Fastwarm® Multi Zone Water Underfloor Heating Kits are based on 200mm pipe centres.
These systems are supplied with egg crate for easy installations
Fastwarm® 16mm DUO Single Zone Water Underfloor Heating Kits are designed for ultra low profile retro fit installations in 1 Zone (area) and come with only 1 thermostatic controller. Meaning regardless of how big the area/how many rooms, the system will act as 1 and be controlled as one zone.
Fastwarm® 16mm DUO are designed for use with 12mm Pipework and can be tiled over directly. Allowing for fast and efficient installation.
Kit sizes range from 20m2 to 120m2
FastWarm® 16mm DUO Multi Zone Water Underfloor Heating Kits are designed for ultra low profile retro fit installations in multiple zones in whole home renovations. Allowing for individual room control using multiple thermostats for each system to set different temperatures and times accordingly.
FastWarm® 16mm DUO are designed for use with 12mm pipework.,
Kit sizes range from 40m2 to 100m2
Fastwarm® 20mm DUO Single Zone Water Underfloor Heating Kits are designed for ultra low profile retro fit installations in 1 Zone (area) and come with only 1 thermostatic controller. Meaning regardless of how big the area/how many rooms, the system will act as 1 and be controlled as one zone.
Fastwarm® 20mm DUO are designed for use with 16mm Pipework and can be tiled over directly. Allowing for fast and efficient installation.
Kit sizes range from 15m2 to 120m2
Fastwarm 20MM DUO Multi Zone Water Underfloor Heating Kits are designed retro fit installations in multiple zones in whole home renovations. Allowing for individual room control using multiple thermostats for each system to set different temperatures and times accordingly.
Fastwarm® Solid18 Single Zone Water Underfloor Heating Kits are designed for ultra-low profile retro fit installations in 1 Zone (area) and come with only 1 thermostatic controller. Meaning; regardless of how big the area/how many rooms, the system will act as 1 heating zone throughout and be controlled by one single thermostat. For multiple room or zone control, please refer to the Fastwarm® Solid18 Multi Zone systems.
Fastwarm® Solid18 Multi Zone Water Underfloor Heating Kits are designed for a low-profile retro fit installations in multiple zones in whole home renovations. Allowing for individual room control using multiple thermostats for each system to set different temperatures and times accordingly.
Still Unsure? Talk to an expert
If you need any guidance or further information our highly experienced team are on hand to help.
Get in touch using our contact form or give us a call on 0800 023 4203.