Electric Underfloor Heating Loose Cable
Fastwarm® Loose Cable systems are the best solution for awkward shaped areas such as bathroom. When laying the system the output is dependent on the spacing between the cables 50mm(200w), 65mm(150w), 100mm(100w).
The Fastwarm® Loose Cable system is best used under tiled floor finishes, however, the system can be covered with levelling compound and therefore can accommodate a wide variety of floor coverings.
FastWarm 100w/m2 Loose Cable Underfloor Heating systems, provides a highly economical floor warming system and are used to cover larger areas.
Cable must be spaced 10cm apart to achieve correct wattage output.
100w/m2 are not suitable as a primary heating source, only to be used as secondary heating for under tiled floors.
Kit sizes range from 1.15m2 to 36m2
FastWarm FastGrid Underfloor Heating Cable kits are an industry first and exclusive to Fastwarm. FastGrid is the ONLY system in the UK that is designed for use with 2mm cable. Meaning lower floor heights and less tile adhesive is required.
If your insulation is sufficient, FastWarm 150w/m2 Loose Cable Underfloor Heating systems are suitable as a main source of heating.
Cable must be spaced 6.5cm apart to achieve correct wattage output.
These cables are most frequently used for kitchens, dining rooms, large bathrooms and the majority of other spaces with tiled flooring.
Kit sizes range from 0.75m2 to 24m2
FastWarm FastGrid Underfloor Heating Cable kits are an industry first and exclusive to Fastwarm. FastGrid is the ONLY system in the UK that is designed for use with 2mm cable. Meaning lower floor heights and less tile adhesive is required.
FastWarm 200w/m2 Loose Cable Underfloor Heating systems, are generally used in areas where high heat loss is a problem, such as conservatories and areas with bi-fold doors.
Cable must be spaced 5cm apart to achieve correct wattage output.
Giving a 25% faster warm up time than standard 150w mats.
Kit sizes range from 0.6m2 to 18m2
FastWarm FastGrid Underfloor Heating Cable kits are an industry first and exclusive to Fastwarm. FastGrid is the ONLY system in the UK that is designed for use with 2mm cable. Meaning lower floor heights and less tile adhesive is required.
New and exclusive for 2023, the ultra low profile Fastwarm FastGrid decoupling matting is specifically designed for use with 2mm Fastwarm Cable.
Still Unsure? Talk to an expert
If you need any guidance or further information our highly experienced team are on hand to help.
Get in touch using our contact form or give us a call on 01268 744 479.