Get expert advice on Water Underfloor Heating systems.
Our highly experienced team are available to answer your questions.
Get expert adviceWe'll match any quote and price, we won't be beaten! Learn More
If you need any guidance or further information our highly experienced team are on hand to help.
Get in touch using our contact form or give us a call on 0800 023 4203 or 01268 744 479.
There are several ways to install the flexible pipework depending on your project needs. We offer various methods to ensure correct pipe spacings are maintained to enable your desired heat output.
The Clip Track system comes in 1m lengths and provides vertical clips the pipe can be pressed into, keeping each coil the correct distance apart. The Clip Track can be secured to the PIR insulation or directly onto an insulated concrete base and covered with a screed.
View productOur fixing Staples provide more flexibility on the pipe spacing. They are plastic U-shaped clips with barbed ends, which can be pressed directly into the PIR insulation to hold the pipework in whatever configuration is required.
View productOur DUO Boards are comprised of an EPS400 polystyrene board with a 200micron aluminium foil face to aid with heat distribution. The boards contain grooves pre-cut to 150mm spacings which the pipe is simply pressed into. The boards can be laid over an existing floor substrate and tiled directly over. Available in 16mm (12mm pipe) and 20mm (16mm pipe) depths.
View productThe Egg Crate system provides great flexibility with pipe spacing and easy installation due to their design. They take the form of a plastic sheet with protrusions across the face that grip the Underfloor Heating pipes once pressed together. This system is available for 16mm pipe or 12mm pipe.
View productLike the Egg Crate system, the Profix system offers a 600x600 plastic tile covered with a repeating eyelet pattern for a 12mm Underfloor Heating pipe to be pressed into. The Profix system also has connecting tabs around the perimeter allowing several panels to be interlocked for easier installation.
View productOur Solid18 Gypsum Panels come pre-grooved at 150mm centres and offer an easy retrofit solution. The high-density dry screed board acts as a heat conductor to give excellent heat distribution.
View productOur Spreader Plate solution enables the installation of Water Underfloor Heating pipes in between floor joists. The Spreader Plates are secured directly to the top of the floor joists and offer grooved channels to contain the underfloor heating pipe. With suitable insulation installed beneath, the Spreader Plates also offer even heat distribution to the floor above.
View productOur highly experienced team are available to answer your questions.
Get expert adviceIf you have any questions about Electric Underfloor Heating, our highly experienced team are available to answer your questions.
You can contact us via the options below:
We offer a full design and quoting service FREE OF CHARGE.
Get a Quote