Electric Underfloor Heating
Fastwarm® Electric Underfloor Heating systems are composed of a twin core conductor that can be used to heat your floor and, depending on the heat output selected, your entire room.
Fastwarm® Electric Underfloor Heating systems come in various forms: -
- Sticky Mats
- For large areas under tile
- Loose Cable
- For awkward areas such as bathrooms
- Underwood Mats
- Can be used beneath floating floor finishes such as laminate or engineered woods
All of the Fastwarm® Electric Underfloor Heating systems are supplied with a lifetime warranty for peace of mind.
Fastwarm® 100w/m2 underfloor heating sticky mats are the perfect solution to take the chill off the floor and be used as a secondary source of heat.
Sticky Mat kits are suitable for larger floor area and be used in conjunction with multiple floor coverings.
Kit Sizes range from 1m2 to 24m2
Fastwarm® 150w/m2 can be used as the primary heat source when used in conjunction with Fastwarm® insulation boards.
Sticky Mat Kits are suitable for use in areas such as kitchens, dining room and living areas.
150w/m2 can be used under most floor coverings (correct installation method applies)
Kit Sizes range from 1m2 to 24m2
FastWarm® 200w/m2 Underfloor Heating Sticky Mat kits are designed to act the primary source of heating and are the perfect solution for areas of high heat loss such as, conservatories or extensions.
200w/m2 provide a 25% faster warm up time in comparison to 150w/m2 systems
Kit Sizes Range from 1m2 to 18m2
FastWarm® 100w/m2 Loose Cable Underfloor Heating systems, provides a highly economical floor warming system and are used to cover larger areas.
Cable must be spaced 10cm apart to achieve correct wattage output.
100w/m2 are not suitable as a primary heating source, only to be used as secondary heating for under tiled floors.
Kit sizes range from 1.15m2 to 36m2
FastWarm® 150w/m2 Loose Cable Underfloor Heating systems, are suitable as a primary heating source providing you have adequate insulation.
Cable must be spaced 6.5cm apart to achieve correct wattage output.
These are our most commonly used cables for kitchens, dining rooms, large bathrooms and most other areas with tiled floors.
Kit sizes range from 0.75m2 to 24m2
FastWarm® 200w/m2 Loose Cable Underfloor Heating systems, are generally used in areas where high heat loss is a problem, such as conservatories and areas with bi-fold doors.
Cable must be spaced 5cm apart to achieve correct wattage output.
Giving a 25% faster warm up time than standard 150w mats.
Kit sizes range from 0.6m2 to 18m2
FastWarm® Underwood Underfloor Heating Mat Kits kits are specifically designed for use under laminate, engineered wood and solid wooden floors.
Underwood Heating Mat Kits are designed at 140w/m2 to ensure optimum performance whilst maintaining wooden floor safety guidelines.
Kit sizes ranges from 1m2 to 24m2
FastWarm® Under Carpet / Vinyl system provides an efficient underfloor heating solution to heat any floor area covered with low tog carpets (2.5 Tog) or Vinyl/Lino.
Under carpet systems are designed at 140w/m2
This system must be installed using Fastwarm 6mm EPS Insulation Board and HeatPak Dual Overlay.
Kit sizes range from 1m2 to 24m2
Still Unsure? Talk to an expert
If you need any guidance or further information our highly experienced team are on hand to help.
Get in touch using our contact form or give us a call on 0800 023 4203.